EMC-THAILAND
LPZ PANEL (PIPING) TYPE FLOWMETER / LZ VARIABLE AREA /LSQ ULTRASONIC OPEN CHANNEL / LD ELECTROMAGNETIC /LUGB /DEPENSOR / LC11 / FLOW METER /OIL METER/ WATER PUMP /VALVE

 
DISPENSER
MOTOR & PUMP

 

 

 

Oil Meter / มาตรวัดน้ำมันเตา / มาตรวัดน้ำมันดีเซล /มาตรวัดน้ำมันพืช / มาตรวัดน้ำมันเครื่อง /มาตรวัดสีน้ำมัน /มาตรวัดสีน้ำ /มาตรวัดกรีเซอร์รีน / มาตรวัดกาวน้ำ / มาตรวัดกาวยาง / มาตรวัดน้ำยาหล่อลื่นต่าง ๆ ทั้งแบบสแตนเลส และ เหล็กหล่อ ทนอุณหภูมิ 80 C -100 C ตามขนาด

 

This product is direct reading of totalizing meter. It is a volume type flowmeter that measures the total volume of the flow through the tube .

It can be widely used in petroleum, chemical, medicinal industries, etc..

Measuring Principle

http://www.yinhuan-flowmeter.com/image/en/bian_1.gif

Under the hydraulic pressure difference of the entrance and the exit of the measuring chamber，a pair of oval gears are rotating and discharge the liquid. By counting the number of rotation of the oval gear, we can get the total volume of the liquid flow through the meter.
High accuracy , has little
influence of the viscosity
of the liquid
Do not need straight tube
to be connected on the inlet and
outlet of the meter.

Technical Parameter

Code Order
unit
DE-15(F)
DE-20(F)
DE-25(F)
DE-40(F)
DE-50(F)
DE-80(F)
Caliber / Size
mm
15
20
25
40
50
80
Flowrate range
m3/h
0.1~1.5
0.3~3
0.6~6
1.5~15
2.4~24
6~60
Accuracy
%
±0.5
±0.5
±0.5
±0.5
±0.5
±0.5
Nominal pressure
MPa
1.6
1.6
1.6
1.6
1.6
1.6
Medium temperature
-20 C - 100 C
-20C -80C
Pressure loss of
0.05
0.05
0.05
0.05
0.05
0.05
0.05
maximum flow
Value of minimum division
0.1
0.1
0.1
0.1
1
1
10
Note: (F)It is the anticorrosive type, it is t made of stainless steel except counting unit.
used for measuring raw material of chemicals, food, etc., but not for strong acid and strong alkali.

 

Dimensions mm

Code Order
L
H
DO
DN
φd
DE -15(F)
170
230
φ65
φ15
φ14
DE -20(F)
200
234.5
φ75
φ20
φ14
DE -25(F)
260
250
φ85
φ25
φ14
DE -40(F)
245
270
φ110
φ40
φ18
DE -50(F)
340
325
φ125
φ50
φ18
DE -80(F)
420
370
φ160
φ80
φ18

 

Flowmeter can be installed horizontally or vertically , but the axes of oval gear wheel axle should be installed in horizontal .
The noumenon material of flowmeter is cast iron (common type, is mainly used in oiliness medium measurement ), stainless steel (Anti-corrosion type)
To prevent the flowmeter from blockage of the impurities, filter should be installed before in the upper stream of the meter.

 

 

 

 

 
Copyright © EMC-Thailand 2007-2009. All rights reserved.
www.emc-thailand.com E-mail : salesde@dhanaroj.com